Microscope Lamps and Accessories
Electron Microscopy Sciences Polishing Disc Metal Resin, 8"
Premadisk Opto Series composite polishing discs.
Diameter: 8"
Abcam TMCB, Selective CK2 inhibitor, 10MG
MW 534.82 Da, Purity >98%. CK2 inhibitor (Ki = 0.25 μM), more selective than DMAT. Unlike DMAT, TMCB displays selectivity over PIM1, HIPK2 and DYRK1a (Ki values are 8.65, 15.25 and 11.90 μM, respectively) and a more favourable selectivity profile over a range of other kinases.
The product is subject to the following: Abcam Restricted Use Statement
Electron Microscopy Sciences Microscope Graticule NE5 Horizontal, 16 mm, 5 mm with 0.05 mm subdivisions
These scales are used for the measuring of lengths of specimen or distances between points on a variety of different shaped objects. By dividing the division of the chosen graticule by the magnification of the objective one obtains an approximate value that each division will represent on the stage. Vertical micrometer scale.
Size: 16 mm
Electron Microscopy Sciences EMS Platinum Aperture with 60 µm hole, 0.12 mm thick
Platinum apertures are easily cleaned by either an aperture flamer or over a bunsen burner in the open air. We maintain a wide variety of Platinum Drilled Apertures in stock with different configurations suiting all of your needs. Nominal hole diameter: +/- 1 micron. Disc diameter: +/- 10 microns. Disc thickness: +/- 10 microns
Size: 60 µm
O.D.: 3 mm
Thickness: 0.12 mm
Electron Microscopy Sciences MicroMounts™ Crystal Tool with Assortment A2, 25 mm pin
MicroMounts are the high performance tools for manipulating and mounting protein crystals, virus crystals, and small molecule/inorganic crystals, and other small, fragile samples. They are ideal for both conventional and high-throughput X-ray crystallography applications.
Each consist of a thin (7.5um thick) micro-fabricated polyimide film, attached to a solid non-magnetic stainless steel pin. Film is wrapped around the steel pin and it provides excellent stiffness and convenient scoop-like action in retrieving and handling crystals. Includes: 75, 150, and 200 um apertures.
Aperture: 25 mm pin
Morrell Instrument Company Inc CFI PLAN ACHROMAT 40X / 0.65 /
Morrell is only authorized to sell the following products in New York, New Jersey, Pennsylvania, Maryland, Washington DC, Delaware, Virginia, West Virginia, Ohio, Indiana, and Kentucky.
Electron Microscopy Sciences Crossed Scale Microscope Graticle NE 72, 27 mm, 20 mm with 200 divisions of 0.1 mm
Used as a horizontal and a vertical scale, they are especially useful when interested in measurement in different axis. NE 72 Crossed Micrometer scale.
Size: 27 mm
Divisions: 20 mm with 200 divisions of 0.1 mm
Electron Microscopy Sciences Crossed Scale Microscope Graticle NE17, 16 mm, 10 mm with 0.1 mm subdivisions
Used as a horizontal and a vertical scale, they are especially useful when interested in measurement in different axis. Crossed micrometer scale.
Size: 16 mm
Divisions: 10 mm with 0.1 mm subdivisions
Surface: Chrome image
Electron Microscopy Sciences PS8 Micrometer Standard with NPL Cert
These stage micrometers are available with a calibration certificate that provides traceability for the precise calibration and confirmation of accuracy of optical measuring instruments, necessary under ISO provisions. The glass discs are mounted in stainless steel slides with engraved serial numbers. Each slide is supplied in a polished wooden storage case. Calibrated by the National Physical Laboratory by taking measurements at selected points on the scale.
Electron Microscopy Sciences Gilder Thin Bar Square 2000 mesh Nickel Grid
Very fine mesh grids have up to 2,000 lines/inch. There is an increasing need in TEM for support films, routinely carbon, as thin as 1.5 - 2.0 nm. The pitch (the distance from the center of one bar to the center of the next bar) dimension in all grids remains constant, allowing use as a lower magnification calibration aid.
Apart from one side being shiny, the other matt, there is a large asymmetrical mark in the rim which gives the identification of which side the specimen is on. Grids are 3.05 mm overall diameter; 2.05 mm mesh area diameter.
Grid: Nickel
Pitch: 12.5 µm
Hole: 7.5 µm
Bar: 5 µm
:
Electron Microscopy Sciences PremaDisk S-SiC Grinding Disc P1200, 200 mm diameter, 1200µm Particles
Grinding disks made with silicon carbide grains with a 60 percent SiC concentration that is hard resin bonded. The disc can be used in wet or dry applications and have a consistent stock removal rate. They are designed with a flat grain curve that will not flatten after a few applications. They are a good alternative to SiC abrasive paper and SiC grinding foils (films), lasting 50-100 times longer.
Grinding disks come with self-adhesive backing. The discs have a thickness of 0.4 mm.
Diameter: 200 mm
Particles: 1200µm
Electron Microscopy Sciences CoverWell™ Perfusion Chamber 4 well with 300 µl volume
CoverWell Perfusion Chambers allows up to 16 different specimens on one coverglass. "Press-to-Seal" covers form water-tight, multiwall cell incubation or cytochemistry chamber when pressed to coverslips or microscope slides. Reagents can be quickly added and removed through dual access ports (1.5 mm Dia) without disturbing or cross-contaminating specimens in adjacent wells. Chambers are removable for permanent mounting of specimens. CoverWell chambers are made from medical grade silicone bonded to clear, UV transparent plastic.
Volume: 300 µl
Electron Microscopy Sciences Scale with Cross Line Microscope Graticle NE7, 23 mm, 10 mm with 0.1 mm spacing
Used as a horizontal and a vertical scale, they are especially useful when interested in measurement in different axis. Horizontal micrometer scale 10mm long with crosslines at 0.1mm spacing. Surface chrome image.
Size: 23 mm
Divisions: 10 mm with 0.1 mm spacing
Surface: Chrome image
Electron Microscopy Sciences BEEM Blocklock, Size "00", 40 Positions
Specimen blocks are safely stored in Blocklock storage modules, a component in the BEEM Specimen Storage System 2000. All Blocklocks can be inserted in a Plastic Protective Box or, by utilizing the adhesive feature, mounted in combination with other Blocklock modules on the BEEM mounting panel that fits in a standard " D-Type" 3-ring binder. Block snaps into cavities so it cannot be inadvertently dislodged. Number and letter identify each cavity. Measures 4-5⁄8"L x 3 .5"W x 5⁄16"H (117 x 90 x 8mm)
Electron Microscopy Sciences EMS Platinum Aperture with 15 µm hole, 0.53 mm thick
Platinum apertures are easily cleaned by either an aperture flamer or over a bunsen burner in the open air. We maintain a wide variety of Platinum Drilled Apertures in stock with different configurations suiting all of your needs. Nominal hole diameter: +/- 1 micron. Disc diameter: +/- 10 microns. Disc thickness: +/- 10 microns
Size: 15 µm
O.D.: 2 mm
Thickness: 0.53 mm